Bryant Boiler Cost in Metro Vancouver (2026)
Real Bryant install, repair, and maintenance pricing by series — plus the factors that move the price and the BC rebates that bring it down.
Bryant (United States) — Preferred-series gas boilers built for comfort. Below are the real starting prices for every Bryantseries we install and service in Greater Vancouver. Prices are transparent “from” figures; your fixed quote depends on the model and your home's existing system.
Installed from
$5,500
Residential range
$5,500–$7,000
Repair from
$189
Bryant Pricing by Series
| Series | Type | Efficiency | Install from | Repair from | Maintenance from |
|---|---|---|---|---|---|
| Preferred Series BWM Boiler | modulating | Up to 95% AFUE | $7,000 | $189 | $169 |
| Preferred Series BW9 Boiler | condensing | Up to 90% AFUE | $6,500 | $189 | $169 |
| Preferred Series BW3 Boiler | cast iron | Up to 84% AFUE | $5,500 | $189 | $169 |
“From” prices are starting points for a standard installation in Greater Vancouver and exclude rebates. Commercial series are quoted per project. Final pricing is confirmed in a free, fixed written quote.
What Affects Your Bryant Price
Existing system & swap complexity
A straight like-for-like swap costs less than re-piping or converting from a tank or furnace system.
Venting changes
New condensing units need PVC/poly venting and a condensate drain — adding venting in a finished space raises labour.
Gas line & meter capacity
Higher-BTU models may need a larger gas line or meter upgrade from FortisBC.
Output & model tier
Larger-output and premium series cost more than entry models — sizing to your real heat loss avoids overpaying.
Removal & disposal
Removing and disposing of an old boiler (especially heavy cast-iron) adds labour.
Controls & zoning
Outdoor reset, smart thermostats, and added zones increase parts and commissioning time.
Permits
Gas and, where required, plumbing permits are included in a professional, code-compliant install.
Water treatment
In hard-water areas (Surrey, Langley) a system flush or treatment protects the heat exchanger and is cheap insurance.
Rebates in BC
High-efficiency condensing Bryant models (95%+ AFUE) typically qualify for FortisBC and CleanBC rebates when installed by a licensed contractor. Programs and amounts change periodically — we identify the current rebates you qualify for and handle the paperwork.
Financing available
Flexible financing lets you spread the cost of a new Bryantboiler. Ask about current options when you call — we'll lay out the monthly figures alongside your fixed quote so there are no surprises.
About Bryant
Bryant builds gas-fired hydronic boilers under its Preferred and Legacy lines, ranging from cast-iron atmospheric units to high-efficiency condensing models. Its top boiler is the modulating stainless-steel Preferred BWM at up to 95% AFUE, alongside the cast-aluminum BW9 condensing unit and cast-iron options.
- Supported by Bryant's nationwide dealer network
- Preferred BWM modulates up to 95% AFUE
- BW9 condensing boiler with PVC direct venting
- Sealed combustion and outdoor reset on the BWM
- Cast-iron Legacy and Preferred options
- Natural gas with propane availability
Bryant Cost FAQ
How much does a Bryant boiler cost installed in Metro Vancouver?+
Bryant boilers start around $5,500 installed and range up to roughly $7,000 for the higher-output residential series, before rebates. Commercial models are quoted individually. Your final price depends on the model, your existing system, venting, and gas-line work — we provide a fixed quote after a free site visit.
What does Bryant boiler repair cost in BC?+
Most Bryant repairs in Greater Vancouver start from the diagnostic fee plus parts and labour. A flat diagnostic fee applies to the service call and is credited toward the repair if you proceed. Common component repairs typically land between $200 and $600 depending on the part. We quote the repair before doing the work.
Are Bryant boilers worth the price?+
Bryant builds gas-fired hydronic boilers under its Preferred and Legacy lines, ranging from cast-iron atmospheric units to high-efficiency condensing models. Its top boiler is the modulating stainless-steel Preferred BWM at up to 95% AFUE, alongside the cast-aluminum BW9 condensing unit and cast-iron options.
Can I get a rebate on a Bryant boiler in BC?+
High-efficiency condensing Bryant models (95%+ AFUE) typically qualify for FortisBC / CleanBC rebates when installed by a licensed contractor. Rebate programs and amounts change periodically — we identify the current rebates you qualify for and help with the paperwork as part of your quote.
Do you offer financing on a new Bryant boiler?+
Yes — flexible financing is available on new boiler installations so you can spread the cost. Ask about current financing options when you call 604-359-1081.
More on Bryant
Compare Other Brand Costs
- Navien Boiler Cost
- IBC Boiler Cost
- Viessmann Boiler Cost
- Rinnai Boiler Cost
- Rheem Boiler Cost
- Weil-McLain Boiler Cost
- Bradford White Boiler Cost
- Lennox Boiler Cost
- Burnham Boiler Cost
- Lochinvar Boiler Cost
- Bosch Boiler Cost
- Laars Boiler Cost
- NTI Boiler Cost
- HTP Boiler Cost
- Carrier Boiler Cost
- Crown Boiler (Velocity Boiler Works) Boiler Cost
- Peerless (PB Heat) Boiler Cost
- Utica Boilers (ECR International) Boiler Cost
- Dunkirk (ECR International) Boiler Cost
- Baxi Boiler Cost
- Williamson-Thermoflo Boiler Cost
- Camus Hydronics Boiler Cost
- A.O. Smith Boiler Cost
Get a fixed Bryant quote — free
Call 604-359-1081 for transparent pricing, current rebates, and financing options. No pressure, no surprises.