NTI Boiler Cost in Metro Vancouver (2026)
Real NTI install, repair, and maintenance pricing by series — plus the factors that move the price and the BC rebates that bring it down.
NTI (Canada) — Canadian-engineered condensing boilers built for cold climates. Below are the real starting prices for every NTIseries we install and service in Greater Vancouver. Prices are transparent “from” figures; your fixed quote depends on the model and your home's existing system.
Installed from
$5,500
Residential range
$5,500–$6,500
Repair from
$189
NTI Pricing by Series
| Series | Type | Efficiency | Install from | Repair from | Maintenance from |
|---|---|---|---|---|---|
| TFTN (Trinity Fire Tube) | heating only | Up to 96% AFUE | $6,500 | $189 | $169 |
| FTVN (FTV Fire Tube) | condensing | Up to 95% AFUE | $6,500 | $189 | $169 |
| TRX Combi | combi | Up to 96% AFUE | $5,500 | $189 | $169 |
“From” prices are starting points for a standard installation in Greater Vancouver and exclude rebates. Commercial series are quoted per project. Final pricing is confirmed in a free, fixed written quote.
What Affects Your NTI Price
Existing system & swap complexity
A straight like-for-like swap costs less than re-piping or converting from a tank or furnace system.
Venting changes
New condensing units need PVC/poly venting and a condensate drain — adding venting in a finished space raises labour.
Gas line & meter capacity
Higher-BTU models may need a larger gas line or meter upgrade from FortisBC.
Output & model tier
Larger-output and premium series cost more than entry models — sizing to your real heat loss avoids overpaying.
Removal & disposal
Removing and disposing of an old boiler (especially heavy cast-iron) adds labour.
Controls & zoning
Outdoor reset, smart thermostats, and added zones increase parts and commissioning time.
Permits
Gas and, where required, plumbing permits are included in a professional, code-compliant install.
Water treatment
In hard-water areas (Surrey, Langley) a system flush or treatment protects the heat exchanger and is cheap insurance.
Rebates in BC
High-efficiency condensing NTI models (95%+ AFUE) typically qualify for FortisBC and CleanBC rebates when installed by a licensed contractor. Programs and amounts change periodically — we identify the current rebates you qualify for and handle the paperwork.
Financing available
Flexible financing lets you spread the cost of a new NTIboiler. Ask about current options when you call — we'll lay out the monthly figures alongside your fixed quote so there are no surprises.
About NTI
N.T.I. (National Thermal Industries) is a Saint John, New Brunswick manufacturer of high-efficiency gas condensing boilers engineered for Canadian heating demands. Its fire-tube and stainless-steel heat-exchanger lineup spans heating-only and combi models with embedded Wi-Fi connectivity. NTI is widely installed across Canada and is known for strong modulation and a limited-lifetime heat-exchanger warranty on its premium lines.
- Canadian-built in Saint John, New Brunswick, for cold-climate performance
- XTRATECH and fire-tube stainless-steel heat exchangers
- Embedded Wi-Fi connectivity for remote monitoring on current models
- Modulation up to 11:1 turndown on the TRX series
- 95–96% AFUE across heating-only and combi lines
- Limited-lifetime heat-exchanger warranty on TFTN and TRX series
NTI Cost FAQ
How much does a NTI boiler cost installed in Metro Vancouver?+
NTI boilers start around $5,500 installed and range up to roughly $6,500 for the higher-output residential series, before rebates. Commercial models are quoted individually. Your final price depends on the model, your existing system, venting, and gas-line work — we provide a fixed quote after a free site visit.
What does NTI boiler repair cost in BC?+
Most NTI repairs in Greater Vancouver start from the diagnostic fee plus parts and labour. A flat diagnostic fee applies to the service call and is credited toward the repair if you proceed. Common component repairs typically land between $200 and $600 depending on the part. We quote the repair before doing the work.
Are NTI boilers worth the price?+
N.T.I. (National Thermal Industries) is a Saint John, New Brunswick manufacturer of high-efficiency gas condensing boilers engineered for Canadian heating demands. Its fire-tube and stainless-steel heat-exchanger lineup spans heating-only and combi models with embedded Wi-Fi connectivity. NTI is widely installed across Canada and is known for strong modulation and a limited-lifetime heat-exchanger warranty on its premium lines.
Can I get a rebate on a NTI boiler in BC?+
High-efficiency condensing NTI models (95%+ AFUE) typically qualify for FortisBC / CleanBC rebates when installed by a licensed contractor. Rebate programs and amounts change periodically — we identify the current rebates you qualify for and help with the paperwork as part of your quote.
Do you offer financing on a new NTI boiler?+
Yes — flexible financing is available on new boiler installations so you can spread the cost. Ask about current financing options when you call 604-359-1081.
More on NTI
Compare Other Brand Costs
- Navien Boiler Cost
- IBC Boiler Cost
- Viessmann Boiler Cost
- Rinnai Boiler Cost
- Rheem Boiler Cost
- Weil-McLain Boiler Cost
- Bradford White Boiler Cost
- Lennox Boiler Cost
- Burnham Boiler Cost
- Lochinvar Boiler Cost
- Bosch Boiler Cost
- Laars Boiler Cost
- HTP Boiler Cost
- Carrier Boiler Cost
- Bryant Boiler Cost
- Crown Boiler (Velocity Boiler Works) Boiler Cost
- Peerless (PB Heat) Boiler Cost
- Utica Boilers (ECR International) Boiler Cost
- Dunkirk (ECR International) Boiler Cost
- Baxi Boiler Cost
- Williamson-Thermoflo Boiler Cost
- Camus Hydronics Boiler Cost
- A.O. Smith Boiler Cost
Get a fixed NTI quote — free
Call 604-359-1081 for transparent pricing, current rebates, and financing options. No pressure, no surprises.